How To Fix Epson Error Code 0xf1

For Epson Tech Support, Call Us Now :

Epson Printer Not Printing Black? Here’s How To Fix
December 16, 2019
Know The Complete Procedure To Connect Epson Printer to Wi-Fi
December 20, 2019

Fix Epson error code 0xf1

Epson printer users often report that they are facing the Epson error code 0xf1 when the print head becomes unable to perform its normal functionality. Even, the device becomes unable to read the document during the initiating mode. 

This error continuously interrupts the printing job until you eradicate this error from the printer. Here, we are going to discuss the common reasons due to which this error occurs and also provide effective solutions to get rid of this error. 

What Causes the Epson Error Code 0xf1? 

There are several reasons behind this error. If a broken piece of plastic gets stuck inside the feed gear, then it may trigger this error to appear. 

Most of the time, this error occurs due to the paper jam issue. If any paper gets jammed inside the paper tray then error code 0xf1 may occur. 

It may happen that there is a dirty ink cartridge that needs to be cleaned or replaced. This can jam the paper while printing and prevent the printing process.  

Furthermore, if the printer is not installed properly or connected with the computer, then you can encounter the Epson error code 0xf1

After understanding the reasons of the error, you can move on to the solution part. 

Easy Hacks to Fix the Epson Printer Error Code 0xf1

There are several ways to solve this error. You can perform all the solutions in their appropriate order to get rid of this error. 

Fix 1: Check the Jammed Paper

As we mentioned earlier, this error may arise due to paper jamming problems. Hence, first, you need to check if any paper is stuck inside the device. Then, you need to immediately remove that. 

By doing this, the error code 0xf1 can be resolved. Here’s how to implement the steps: 

  • First and foremost, turn the computer off and then press the paper button to remove the jammed paper. 
  • If you see there are torn pieces of paper inside the device, then open the cover of the device and then clear all the affected pieces. 
  • Afterward, reload the paper tray into the sheet feeder. Afterward, press the Paper button once again. 

Now, you can try to print once again to check if the problem is fixed. 

Fix 2: Run the Printer Troubleshooter Tool

You can solve this error easily by running the Printer Troubleshooting tool. To run this, you can take a quick glance at the steps below: 

  1. First of all, open the Control Panel by going to the Start menu. 
  2. Afterward, navigate to the Troubleshooting category. Here, you will see all the options on the left pane of the screen. 
  3. Next, select the ‘Printers’ option from the list.
  4. Wait for a few seconds until the troubleshooting process running. 

Once the troubleshooting process completes, you can try to print to check whether the error is resolved. 

Fix 3: Move the Printer Head Assembly

According to some users, they have fixed this error easily by moving the Printer Head assembly in a particular direction. Henceforth, in this method, at first, we will turn the device Off and move the Printer Head Assembly. 

You can do this by following the steps stated below: 

  1. First of all, disconnect the power cable from the power outlet to turn the device Off. 
  2. Afterward, raise the lid of the device. Then, move the Printer Head Assembly to the left. 
  3. Thereafter, move the Printer Head Assembly back to the right. 
  4. Now, turn the printer On and check if the error still occurs. 
  5. If you see that the error still appears, then repeat this process for 5-6 times. 

Fix 4: Reinstall the Device

If the above hacks fail to solve the Epson error code 0xf1, then reinstalling the Epson printer can help to eliminate this error. 

To reinstall the printer, you can perform the steps as follows: 

  1. In the beginning, go to the Start menu and open the ‘Devices and Printers’ category. 
  2. Search for the Epson Printer by scrolling down the list of devices and right-click on that. 
  3. Choose the ‘Remove device’ option from the list. 

Afterward, restart the computer and add the Epson printer once again from the same menu. Once you complete the installation process successfully, try to print something to check whether the error code 0xf1 is fixed. 

Additional Information: Preventional Guide

To prevent further damages, you can focus on the tips and tricks provided below: 

  • Ensure that the papers you insert into the output or input tray are wrinkle-free, smooth and not smeared. 
  • Confirm that you are using the A-4 size paper with high-quality and the papers fed with the printable side of the device. 
  • Before loading the paper don’t forget to clear the torn paper. 
  • Make sure that the number of papers you installed does not exceed the limit. 
  • Always try to place the printer on a stable and flat surface. The printer may not work if it is located on an unstable or tilted surface.  
Call Now ButtonCall Us Now Epson Tech Support